Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Arlington?
A standard chimney cleaning in Arlington typically costs $180 to $340, with most single-flue wood-burning fireplaces landing near the middle of that range. Add a documented inspection and you’re usually looking at $250 to $450 for the visit, depending on the chimney’s access and condition. The written estimate we give you before any work begins is the final word on price, and there’s no charge for that estimate.
Chimney sweeping is a home-safety service, not a seasonal chore. Creosote builds up in the flue every time you burn, and it’s flammable. A proper sweep clears that buildup, and a professional chimney sweep can tell you whether your flue, crown, and liner are working the way they should. In Arlington, where a lot of homes date back decades and have had fireplaces retrofitted or converted over the years, there’s often more going on inside the chimney than the homeowner realizes.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s how chimney work breaks down by job type in the Arlington market this year. These are typical estimated ranges, not fixed prices. The estimate you receive on-site sets the number.
| Service | Typical Cost Range |
|---|---|
| Standard sweep, single flue (wood-burning fireplace) | $180 – $340 |
| Sweep plus Level 1 inspection | $250 – $450 |
| Sweep plus Level 2 inspection (camera) | $350 – $600 |
| Multi-flue sweep (two or three flues) | $320 – $650 |
| Heavy creosote removal (glazed or third-degree buildup) | $400 – $800 |
| Fireplace and firebox cleaning | $90 – $200 |
| Chimney cap installation | $150 – $400 |
| Crown repair | $300 – $900 |
| Liner resurfacing with HeatShield | $650 – $1,400 |
| Full liner replacement (DuraFlex system) | $1,800 – $4,500 |
| Masonry and mortar repair | $250 – $1,200 |
What pushes a job toward the top of a range? Access is a big one. A chimney on a steep roof, an unlined flue that needs a camera inspection, heavy creosote that’s hardened into glaze, or a liner that’s cracked or falling apart all add time and material. A gas insert or a fireplace that’s been converted to gas burns differently and needs a different cleaning approach than a wood-burning fireplace, so don’t assume the standard price applies without telling us what you’re burning.
What keeps a job on the low end? A clean, accessible flue on a single-story home, a recent sweep schedule, and a chimney that hasn’t been neglected. Regular care is the cheapest path because it catches small problems before they become liner replacements.
What Affects Chimney Cleaning & Sweep Pricing in Arlington
- Chimney type and flue count. A single wood-burning flue costs less to clean than a multi-flue masonry chimney or a house with a fireplace plus a furnace flue. Each flue is a separate job.
- Creosote severity. Light, friable creosote sweeps out easily. Glazed, hardened creosote takes more time and more careful work, and third-degree buildup often signals a bigger issue with how the fireplace is being run.
- Access and roof geometry. Arlington has plenty of older homes with steep roofs, tight side yards, and chimneys offset from the ridge. Hard-to-reach chimneys take longer, and that shows up in the price.
- Inspection level needed. A Level 2 inspection with a camera runs higher than a basic visual check. You’ll want it after a chimney fire, a conversion, a home purchase, or any change to the flue system.
- Material quality. Prices for repair work reflect professional-grade materials, not generic substitutes. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the same brands specified by chimney professionals across the country – and those products cost what they cost for a reason.
- Local housing stock. Arlington’s mix of century-old masonry chimneys and newer construction means the scope of work varies a lot from house to house. The age of the chimney and the condition of the crown, flashing, and mortar are often the real drivers of the final number.
What Drives Cost Up or Down
Two things matter most: how often the chimney has been swept, and whether anyone has been burning properly. A homeowner who burns seasoned hardwood and sweeps when we advise it will pay closer to the low end of every range. A chimney that’s gone several seasons without attention, or one where unseasoned wood has been burned, tends to cost more to bring back to safe condition.
The fireplace itself matters too. Prefab or factory-built fireplaces come apart differently than traditional masonry, and the cleaning method changes with the construction. We ask about that before quoting, because quoting without it isn’t honest.
How to Save on Chimney Cleaning & Sweep
- Book before the burning season, not during it. Sweeping in late summer, before the first cold snap, gets your chimney ready for fall and keeps you ahead of the busy stretch. That’s good planning, not a sale pitch.
- Bundle sweeping with a formal inspection. When we’re already on the roof, adding a documented inspection costs less than scheduling it as a separate visit. One trip, one number, one report.
- Sweep on schedule. How often depends on how much you burn, but annual is the standard rule of thumb for regular fireplace users. Catching creosote early avoids heavy-removal pricing later.
- Burn seasoned hardwood. Dry wood produces less creosote than wet or green wood, and cleaner burning means cheaper, faster sweeping.
- Take the free estimate seriously. Call (833) 309-7302 for a walkthrough. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A free estimate gives you a real number before you commit to anything.
Why Choose Sentry Chimney Sweep
We don’t just clean chimneys. We protect the homes behind them. Sentry is a dedicated chimney specialist with three service pillars under one roof: sweeping, inspection, and repair. That means you don’t coordinate three contractors when your chimney needs a sweep, a documented inspection, and a crown fix. Sweep. Inspect. Repair. One call.
Our technicians have up to 11 years of experience, and every repair is done with professional-grade materials. When a liner is compromised, we use HeatShield resurfacing or a DuraFlex liner system to restore the flue to code-quality condition instead of patching it and hoping it holds. We work across Arlington and the surrounding neighborhoods, from single-family homes to townhomes and condos with chimneys that need real attention.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney cleaning cost in Arlington?
A standard chimney cleaning in Arlington typically runs $180 to $340 for a single wood-burning flue, and a sweep plus inspection usually lands between $250 and $450. Final price depends on access, creosote severity, and chimney type. Call (833) 309-7302 for a free estimate – the written quote sets the final number.
Is it cheaper to repair or replace my chimney liner?
Resurfacing a liner with HeatShield usually runs $650 to $1,400, while a full liner replacement with a DuraFlex system is $1,800 to $4,500. If the existing flue is sound and just needs resurfacing, repair is the less expensive route. If the liner has failed structurally, replacement is the safer call. Call (833) 309-7302 for an inspection that tells you which situation you’re in.
Can you clean my chimney the same day?
Same-day sweeping is often possible, depending on the schedule that day. Call (833) 309-7302. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes in outside dispatch hours, we book it into the next opening.
Do I need a Level 2 inspection, and what does it cost?
A Level 2 inspection with a camera typically costs $350 to $600 when it’s combined with a sweep. You’ll want one after a chimney fire, a fireplace conversion, a home purchase, or any change to the flue. It’s the documented assessment that tells you the real condition of the chimney. Call (833) 309-7302 to schedule yours.
How often should I have my chimney swept?
Annual sweeping is the standard for regular fireplace users, and more often if you burn heavily or notice creosote buildup. Arlington chimneys that haven’t been serviced in several seasons often need heavier removal at $400 to $800 instead of a routine sweep. Call (833) 309-7302 to get on a schedule that keeps your chimney safe year round.
Get Your Free Estimate
Chimney work shouldn’t come with guesswork or surprise fees. We quote per job, in writing, before we start, and the estimate is free. If your fireplace has gone a season or two without attention, or you’re not sure when the last sweep happened, that’s the time to find out. Your chimney works harder than you think – so do we.
Call (833) 309-7302 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Sentry Chimney Sweep.
Pricing reflects the Arlington market as of 2026. Sentry Chimney Sweep offers free estimates – call (833) 309-7302.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Dana Padgett"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Gabriela Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Sarah Kowalski