Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Arlington?
Chimney liner and rebuild work in Arlington typically runs $2,400 to $7,800 for a stainless steel liner installation, and $5,500 to $18,000 when a chimney rebuild is part of the job. Most single-flue Arlington homes fall toward the lower end of both ranges, and every project starts with a free written estimate that sets the final price.
We’re Sentry Chimney Sweep, and chimney work is all we do. Not general handyman repairs that wander into the fireplace, but liner systems, crown rebuilds, and structural chimney restoration performed with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That focus matters when you’re pricing a job this big, because the liner behind your firebox is a safety system, not a cosmetic upgrade. Our technicians have up to 11 years of experience reading Arlington chimneys and knowing what a liner or rebuild actually needs.
If your fireplace hasn’t been looked at in a while, start there. Call (833) 309-7302 for a Sentry Chimney Sweep inspection before you price anything.
- Typical stainless liner install: $2,400 – $7,800
- Typical full chimney rebuild: $5,500 – $18,000
- What sets the price: flue height, liner material, chimney damage, and access
- Estimate: free, written, and per job
- Call: (833) 309-7302. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
The table below shows typical Arlington ranges for the most common liner and rebuild scopes. These are estimates, and your written estimate sets the final price.
| Line Item | Typical Range (2026) |
|---|---|
| Stainless steel flue liner, single-flue install | $2,400 – $7,800 |
| Liner for a tall or multi-flue chimney | $4,500 – $9,500 |
| HeatShield liner resurfacing (no full reline) | $1,800 – $4,200 |
| Crown rebuild | $900 – $2,800 |
| Mortar repoint (upper chimney section) | $1,200 – $3,800 |
| Chimney rebuild from roofline up | $5,500 – $12,000 |
| Full chimney rebuild to grade | $12,000 – $18,000 |
| Flue cap and top-seal fitting | $250 – $700 |
| Chimney inspection (safety and structural assessment) | $250 – $500 |
Two things push a price up in this market. Height and access do most of the work: a chimney on a steep Arlington roofline or one packed against a neighboring lot is slower to reach and slower to work, and that shows up in the labor line. Material choice is the other lever. A standard stainless liner handles most single-flue fireplaces, but an oil appliance, a wood insert, or a high-efficiency setup may call for heavier gauge or insulation, which moves the number toward the top of the band. When a rebuild is in scope, the amount of masonry that has to come down and be rebuilt decides the price more than anything else.
What Affects Chimney Liner & Rebuild Pricing in Arlington
- Flue height and roof pitch. Arlington’s older neighborhoods have a lot of steeply pitched roofs and tall chimneys, and a longer, harder-to-reach flue means more time on the install. A liner that’s easy to feed is cheaper than one that fights you the whole way.
- Liner material. A standard single-wall stainless liner sits at the low end. Insulated flex liners and heavier-duty systems, including DuraFlex and Olympia Chimney options, cost more but suit appliances and conditions a basic liner won’t handle.
- Condition of the masonry. If the chimney crown is cracked and the mortar is soft, a liner alone is only half the fix. Rebuilding the crown or repointing before the liner goes in is the difference between a repair that holds and one that doesn’t.
- Rebuild depth. A rebuild from the roofline up costs a fraction of a full rebuild to grade. How far the damage runs down the stack, and whether the chimney is interior or exposed on an outside wall, sets which one you’re looking at.
- Home age and prior work. Arlington has a deep stock of older homes, and some have chimneys that were relined, patched, or retrofitted years ago. Untangling previous work adds time, and sometimes removes it, depending on what’s there.
- Access to the chimney. A chimney on a tight lot with a low service clearance is harder to work than one with room around it. It’s a plain logistical fact of the job, and it’s part of why two similar houses can price differently.
Liner and rebuild pricing is also a good moment to understand the whole system rather than just one part. We handle the liner, the crown, the mortar, and the flue cap as one project, so there’s no coordinating three contractors who each fix their slice. Sweep. Inspect. Repair. One call. Explore our Arlington service coverage to see how a liner job fits with the rest of our work in your neighborhood.
How to Save on Chimney Liner & Rebuild
The biggest savings come from catching damage before it reaches the rebuild stage. A cracked crown that gets fixed while it’s small is a crown rebuild. Left alone through a few wet seasons, that same crack lets water into the masonry and turns into a rebuild from the roofline up. The cost difference is measured in thousands, and it’s the single most reliable way to keep a liner and rebuild budget in check.
A few practical moves, in order of what they tend to save:
- Get a formal inspection first. Our chimney inspection delivers a documented assessment of chimney health, so you know whether you need a liner, a crown, or a full rebuild before anyone quotes a number. It costs far less than guessing wrong on a large job.
- Fix the crown while it’s a crown. Water is the main enemy of a masonry chimney. Sealing the top and rebuilding a failing crown early keeps the structure above the roofline in good shape and keeps a small repair a small repair.
- Match the liner to the appliance. Overspending on a heavy-duty liner for a standard fireplace wastes money, and underspending on one for an insert or a high-efficiency appliance means doing it twice. Our technicians size the liner to what you actually burn.
- Bundle the work. A repoint, a crown, and a liner are cheaper as a single project than as three separate visits. Since we work under one company, we can group the scope and quote it together.
- Ask for the free estimate and read it carefully. The written estimate sets the final price. Call (833) 309-7302 for a free estimate, and don’t commit to a project until you’ve seen the scope in writing.
If you’ve been putting off the inspection because you’re worried about the number, that’s exactly the call to make first. The job is easier to price before it grows.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Arlington?
A typical stainless steel chimney liner installation in Arlington runs $2,400 to $7,800, with taller or multi-flue chimneys landing between $4,500 and $9,500. The material, flue height, and appliance type move the price within that range. Call (833) 309-7302 for an exact quote; estimates are free.
Is it cheaper to repair or replace my chimney?
Repair is almost always cheaper than a full rebuild, and a liner and resurfacing job typically costs a fraction of rebuilding the structure. HeatShield resurfacing at $1,800 to $4,200 can restore a damaged liner without a full reline, while a full rebuild runs $5,500 to $18,000. The deciding factor is how much of the masonry itself is compromised. Call (833) 309-7302 and we’ll tell you which side of that line your chimney is on, with a free written estimate.
How much does a chimney rebuild cost in Arlington?
A chimney rebuild in Arlington runs $5,500 to $12,000 from the roofline up, and $12,000 to $18,000 for a full rebuild to grade. The extent of the damage and the chimney’s depth set where you land. Call (833) 309-7302 for a free estimate and a clear scope of what has to be rebuilt.
Can you fix my chimney liner the same day?
Many liner jobs can be handled with same-day service once we’ve confirmed the scope, though a rebuild or a combined liner-and-masonry project usually takes more than one visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 309-7302 and we’ll book the right job for what your chimney actually needs.
Why does my liner or rebuild cost more than a neighbor’s?
Because liners and rebuilds are priced per job, not per house, and two chimneys on the same street can differ in flue height, roof pitch, masonry condition, and access. A chimney exposed on an outside wall also weathers differently than an interior one. Call (833) 309-7302 for a free estimate so the number reflects your chimney, not a generic average.
Why Professional-Grade Materials Matter on a Liner Job
A liner or rebuild is a large purchase, and the materials are the part of it you can’t see once the work is done. We work with professional-grade industry brands on every job: DuraFlex and Olympia Chimney for flex and rigid liner systems, HeatShield for liner resurfacing, and Gelco, Famco, and Copperfield for the components that finish the job. These are the same kinds of materials specified by certified chimney professionals across the trade, and we don’t use generic substitutes on a safety system.
The other piece is the assessment behind the quote. Liner and rebuild work on an active fireplace involves high heat and carbon monoxide, and an unsafe flue is a genuine hazard rather than an inconvenience. That’s why a formal inspection comes before any large quote, and why we treat the chimney as a fire-safety system from the first visit to the last. Our technicians have up to 11 years of experience, and they inspect, sweep, and repair under one roof so nothing gets lost between contractors.
The name Sentry is deliberate. Standing guard over your home’s fire safety means looking at the chimney before it fails, not after. We don’t just clean chimneys. We protect the homes behind them.
When to Request a Liner or Rebuild Estimate
Some signs point straight to a quote. A liner that’s cracked, missing, or unlined altogether needs attention before the next fire. A chimney with a crumbling crown, soft mortar, or visible gaps above the roofline is heading toward a rebuild, and the sooner the better. Rusted or damaged flue tiles, a firebox that’s pulling away from the surround, or a smoky fireplace that’s never drafted right all deserve a look. If you’ve had a chimney fire, damaged flue, or don’t know the last time the flue was inspected, that’s the moment to call.
We keep the estimate free and the scope in writing, so you can decide with real numbers in front of you. A chimney that needs a liner is still a chimney that needs a liner whether you call this week or next, but a chimney that needs a rebuild is better found before the wet season does more of the work for you.
Contact Us for a Free Chimney Liner & Rebuild Estimate in Arlington
Chimney liner and rebuild pricing in Arlington centers on a few things: flue size, material choice, and how much masonry repair the chimney needs. The most reliable way to get your real number is a free written estimate. We answer 24/7. Call (833) 309-7302. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
From a spotless sweep to a full rebuild, we handle sweeping, repair, and inspection under one company so you can trust the specialist on the job from start to finish. If your chimney hasn’t been checked in a while, don’t wait for smoke in the wrong place. Let us stand guard over it, and let’s get the number settled with a free estimate.
Pricing reflects the Arlington market as of 2026. Sentry Chimney Sweep offers free estimates – call (833) 309-7302.
Written by the team at Sentry Chimney Sweep.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Dana Padgett"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Gabriela Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Sarah Kowalski